Contact

SORG TMJ masterclass course

Date: April 24 – 25, 2026 I Riffa, Bahrain

Two-day masterclass workshop on human anatomical specimens focused on TMJ replacement

Faculty of experienced national and international speakers

 

Course Chairman Mohammed A. Al-Muharraqi, Manama, Bahrain

Course concept 

This high-impact masterclass is specifically designed for experienced oral and maxillofacial surgeons seeking comprehensive, hands-on exposure to contemporary custom-made TMJ reconstruction. The course combines state-of-the-art digital planning, biomedical engineering collaboration, and supervised cadaveric surgery in a structured, immersive learning environment.

The workshop will be conducted on fresh frozen human anatomical specimens, ensuring the highest level of anatomical fidelity and surgical realism. Participants will engage directly with biomedical engineers to undertake the complete digital workflow, including virtual planning, prosthesis design, and case-specific customization of the TMJ system. This unique surgeon-engineer interaction allows candidates to understand not only how to implant the prosthesis, but why design decisions are made for optimal biomechanical and functional outcomes.

Following the planning phase, participants will proceed to full surgical implantation of the custom 3D-printed TMJ prostheses. Under the close supervision of internationally renowned TMJ surgeons, candidates will perform each critical step of the procedure, including surgical exposure, fossa and mandibular preparation, prosthesis positioning, fixation techniques, occlusal considerations, and intra-operative troubleshooting. Faculty-led discussions will focus on indications, patient selection, complication avoidance, and long-term outcome.

By the end of the course, participants will be able to:

  • Understand the indications, patient selection criteria, and contraindications for total temporomandibular joint replacement (TMJ TJR), including primary, complex, and revision cases.
  • Apply contemporary digital planning principles in collaboration with biomedical engineers to design custom-made TMJ prostheses using the KLS Martin IPS TMJ TJR system.
  • Demonstrate detailed anatomical knowledge of the TMJ region and adjacent neurovascular structures relevant to safe surgical exposure and implantation.
  • Perform the complete surgical workflow for TMJ total joint replacement on fresh frozen cadavers, including fossa and mandibular component placement, fixation strategies, and occlusal management.
  • Recognize and manage intra-operative challenges and complications, incorporating evidence-based strategies to optimize surgical accuracy, stability, and long-term outcomes.

Target audience Consultants, specialists, and residents in oral and maxillofacial surgery  

Language English, no translation provided

Course venue The Crown Prince Centre for Training and Medical Research (CPCTMR) at the Royal Medical Services of the Bahrain Defence Force

Course fee (includes participation, the cost of the lab and specimens, as well as catering during the course)

For participants of the full course (limited places available):

2.190 EUR 

For participants taking part in the theoretical sessions only:

400 EUR

 

 

Organizer on behalf of S.O.R.G. e.V.: KLS Martin SE & Co. KG, KLS Martin Platz 1, 78532 Tuttlingen, Germany

Program of the course

Friday, April 24, 2026 I 8:00 a.m. – 6:00 p.m.

8:00 – 8:30 a.m. Registration, welcome and course introduction

Part 1 | 8:30 – 10:00 a.m.

  • Indications, patient selection and treatment pathways for total TMJ replacement 
  • Applied surgical anatomy of the TMJ and adjacent neurovascular structures 

Part 2 | 10:15 a.m. – 12:30 p.m.

  • Digital planning and virtual surgical workflow for custom-made TMJ prostheses
  • Biomechanics and design principles of alloplastic TMJ prostheses 
  • Surgical approaches for TMJ TJR – Access, exposure and soft tissue management 

Part 3 | 1:15 – 2:45 p.m. | Hands-on session

  • Case review with KLS Martin engineers
  • Virtual planning and prosthesis customisation
  • Discussion of design rationale and surgical implications

Part 4 | 3:00 – 5:30 p.m. | Dissection session

  • Surgical approaches to the TMJ (preauricular / submandibular)
  • Layered dissection and facial nerve protection
  • Exposure of the joint and preparation of surgical field

Part 5 | 5:30 – 6:00 p.m. | Faculty-led debrief and case discussion 

 

 

Saturday, April 25, 2026 I 8:30 a.m. – 5:30 p.m.

Part 1 | 8:30 – 10:30 a.m.

  • Coffee and review of day 1
  • Step-by-step surgical technique for TMJ total joint replacement
  • Occlusion, mandibular positioning and peri-operative jaw management

Part 2 | 10:45 a.m. – 12:15 p.m.

  • Complication prevention, recognition and management in TMJ TJR
  • Revision TMJ surgery and management of failed alloplastic joints 

Part 3 | 1:00 – 4:30 p.m. | Dissection session 2

  • Fossa and mandibular component preparation
  • Implantation of custom-made 3D-printed TMJ prostheses
  • Fixation techniques and intra-operative verification
  • Troubleshooting and faculty-guided refinement

Part 4 | 4:30 – 5:30 p.m.

  • Post-operative care, rehabilitation and long-term outcomes in TMJ TJR
  • Final faculty panel discussion, key take-home messages and course evaluation 

Part 5 | 5:30 p.m. | Certificate presentation and farewell

Faculty

Dr. Ahmed Abdelrehem Moustafa Mohammed

Cairo, Egypt

Dr. Mohammad Abedin

Dubai, United Arab Emirates

Dr. Mohammed Al-Muharraqi

Manama, Bahrain

Dr. Yasir Alturkistany

Riyadh, Saudi Arabia

Prof. Dr. Dr. Tobias Ettl

Regensburg, Germany

Prof. Dr. Dr. Peter Kessler

Maastricht, The Netherlands

Mr. Nadeem Saeed

London, United Kingdom

Reserve your spot

 

For participants of the full course: 

2.190 EUR

 

For  participants taking part in the theoretical sessions only: 

400 EUR

Quantity
Quantity

Billing address (if different from address above)
I consent to my supplied contact information and answers being provided to the KLS Martin Group so they may use it to communicate with me regarding their medical solutions and services. You may also be contacted by a distribution partner of KLS Martin. More information: https://www.klsmartin.com/en/

supported by KLS Martin

supported by KLS Martin

Cancellation Policy

Cancellation by course organizer

  • the course organizer reserves the right to cancel an event due to low enrollment or other circumstances which would make the course non-viable.
  • if the organizer cancels a course, registrants will be offered a full refund of registration fees. The organizer will not reimburse other costs incurred with the course (travel or hotel bookings by participants not made by the organizer).
  • should circumstances arise that result in postponement of a course, the organizer has the right to either issue a full refund or transfer registration to the same event at the new, future date.

Registration cancellation by participant:

  • The deadline to receive a refund for your registration is 21 business days before the course.
  • Registration cancellations received prior to the deadline may be eligible to receive a refund less a service fee of € 100.-.
  • Cancellations received after the stated deadline will not be eligible for a refund.
  • Refunds will not be available for registrants who choose not to attend the course.
  • Cancellations will be accepted in writing only and must be received by the stated cancellation deadline. When writing your cancellation please include the details of your credit card or bank details (BIC).

Note regarding Covid-19

SORG is continuously monitoring the situation with COVID-19 and aims to minimize disruption to planned courses and educational events. However, in the current climate, SORG cannot exclude the possibility that scheduled courses or events will be postponed, cancelled, or otherwise disrupted. SORG endeavours to give due notice of these decisions but encourages you to ensure the tickets and accommodation you book yourself are refundable. 

This site uses third party website-tracking-technologies to provide their services. I agree and can revoke or change my consent at any time with future effect.

Refuse Settings Accept ImprintPrivacy policy